Hi ! Yes, coolant refill to MAX. I still got idle problem, since I ride ~50km, the problem did not resolves itself. But now I've got my engine check signal light on my dashboard :ugeek: When I strated this project, I labelled all the wires before disconnecting them, so, it cannot be an inversion of ...

I'm a bit lost... Where can I look to resolve this problem ? Apparently, it's not the RACV, I've re-checked the vacuum circuit, all hoses are well fitted and clamped... my gaskets are new too, all bolts correctly bolted...I'm very confused :? The only thing that is not clamped is the connection betw...

Thanks BETEK ! RACV cleaned, the mechanism runs smoothly, but idle still unstable. I'll order some hoses and connect the RACV to the coolant. See : http://www.ej9.ru/ej9/p1/D16Z6_im_sh.png http://www.ej9.ru/ej9/p1/D16Z6_im_sh2.png http://www.ej9.ru/ej9/p1/D16Z6_im_sh3.png That's what I've done... So...

Ok thanks, I'll try this !

I've short circuited the RACV with a hose and 2 clamps. (BETEK : What is your setup ? Where did you connect the RACV ?) Also, I bolted the last IM bolt (painful, but done :D). All hoses are well fitted / clamped. Then I started it, idle at 1800rpm, all normal. Then it begin to warm and the rpm drop ...

Hi, I've juste done the IM swap on my EJ9 with a D16Z6 IM... - I did not find a way to bolt the 12mm bolt under the middle of the IM (I'll fix that tomorrow, maybe I'll drill a bigger hole in the center of theIM) - When I first strated it : no error code (yihaa :D), idle at 2000rpm, very stable ! - ...