my problem has been fixed: badly rotating RACV, opened it up, cleaned and filled it with wd40, gave it af few turns and it turned very smooth ever since, no idling problems or CEL's whatsoever.

If i may interrupt: yesterday i fastened de last bolt, and filled the car with oil and coolant. first try: started right away, no CEL's nothing, idled at about 2000, and after 15 seconds or so, it also started to yo-yo between 1200 and 1800, exactly the same thing. i thought, well okay, the coolant ...

I took a look yesterday and yes indeed, it was laying somewhere between 2 engine harnesses, so it looked like it was a part of it, but i found, it was a real "BingO"-moment :P I think i understand now where every hose should go to, and wich one should be blocked off, so i hope to have ever...

alright, will try the way of relooping en blockingoff first. For the oem fuelpressure-regulator, the vacuumline on the top goes to the IM, but the slightly bigger tube on the bottomside of the FPR? is that the fuel return line? because i can't seem to find the place where it should go to? and for th...

Alrightthat sounds pretty clear, but on civicclubholland people told me; -i should put on the connector on the RACV -i should short-circuit the 2 tubes coming out of the RACv -i should short-circuit the 2 thin coolant tubes next to the first runner -and i should block off the 3 coolant tube wich is ...

I'm at the point of mouting the z6 IM on mij D14z2, but before that i still have a few questions, would be very nice if you guys could help so ik mount it today! Where does the hose ABOVE the PCVhose goes to? i know it's a coolantline, but to where? http://i1098.photobucket.com/albums/g365/4631JK/DS...

Thank you very much, now i can finally divide the TPS en the MAP (indeed i ment de MAP ;) ) and yes, indeed is was one of the dead-end plugs, and it was just 1 wire, with 1 piece of 2mm naked copper, wich caused the fatal heart-attack. cause: rubbing against the big IM-support through the years. i'l...

Because of frustation that my car has let me down because of an shortcut, i unplugged all the sensor wires without labelling them, and to make even worse, de TPS en de IAT sensor, both use the sort plug/connector, does anyone know what color the wires are from the TPS sensor? So i can connect everyt...