sorry guys little timid bout electronics

OBD2 engine looms run all the way from the engine directly to the ECU. OBD1 engine looms run only towards the right tower, from there a second loom passes the firewall beneath the fusebox and enters the ECU. What I should do is what Ilya says, get the connectors of the loom. But also get a set of E...

from OBD1 harness u ned only: 4 connectors for Injectors Jets (swap with stock, and unPair it) 1 connector to IAT (swap with stock TA) 2 connector sto DIZZY (new 9-11 wires to ECU) 1 connector to IACV 2 connectors to VTEC system (valve and sensor) that's all. u dont need put in car all harness OBD1...

ok say i have the full obd1 engine harness, dizzy an iacv and the ecu could i just swap every thing over instead on cutting wires.?

so the dpfi to mpfi write up can help?? this is a link i have below
ps.
sorry bout the double posting threads this is the question i need help with. http://hondacrx881.tripod.com/mpfiswap.html

is this all the same? is SFI the same as DPFI? there are alot of threads on DPFI to MPFI but only obd0 to obd1.. so im trying to find out if its the same process in conversion..confued need help seem like that same thing change dizzy intake mani an wire up??

ilya wrote:what u spec now? motor, head,intake, ecu. year of car? and what u want get from "new spec".

hi i have a d15z4 SFI (DONT KNOW IF ITS THE SAME AS DPFI???) p2e ecu i have i/h/e its a 99 civic lxi i want to go the way of MPFI and also i want to chip the ecu ..CAN U HELP plz

what are the specific parts i need to do the obd1 swap? 1. 92-95 civic engine harness (my engine is non vtec and MT would a vtec AT harness be usable) 2. 92-95 mpfi dizzy from a vtec or nonvtec? 3. P06 ecu 4. intake mani (i have a jdm d15b 3 stage side drafted mani on mine now will the 3 wire iacv w...

it was the idle speed motor the 3 wire notorious for giving problems denso made for honda an toyota corolla ae111 thanks for all the help

the cold idle is at 1200-1500 engine warms up goes to 1300rpm wen ac is on 1100 rpm, someone told me to check the pcv valve??