Great :) ,will you get any head flow numbers ? Since they use CFD programs and such @ MCE they must have done a before and after head flow test ?I would like to compare it to my results of the ported head by Endyn.Also what cam are you going to use? nope emile has not done a before head flow test b...

yes i agree with joris on this one, emile the enginebuilder told me the same thing. but you don't want to get to rich or your "lubrication" of cilinder walls is "flushed of" sort of is told me....

i know,but the manufacturers discription tells it exceeds oem spec,but it can be wrong i don't know. but have u seen the specs of the ignition/distributor, 45k volts displacement to your sparkplug, original distributor has something around 20/30k volts. so this setup is handy if you want to run a ho...

on ebay i have found a better ignition (not MSD or something) but an upgraded version of the stock distributor. http://cgi.ebay.com/ebaymotors/NEW-COMPLETE-IGNITION-DISTRIBUTOR-1-5-1-6-SOHC-NON-VTEC-/170649670111?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AHonda&hash=item27bb8351df#ht_...

in our workshop I have build a D16a9 engine into a honda crx the engine was converted for obd1 (because the engine was placed in a 5th gen civic coupe). our D14 engine's with obd1 swap use a TD41u ignition. but the obd1 conversion on the D16a9 enigne used a TD43U ignition..... the main difference be...

jepz tuned it with eCtune. the only problem of our beloved D14 setups with obd1 upgrades are running a little rich, because of the slightly to big injector size (240cc) but better to rich then to lean the eCtune guy tells me that u can tune your engine with the adjusted fuelmaps or fuel pressure reg...

with very, very very bad piston rings and exhaust i have reached 122bhp and 148 Nm of torque on dyno with my D14 (ask dodo bizar....:P) the setup on that time was: IM swap obd1 swap adjustable cam gear megan racing header and flowed head. for my current setup what i'm building on the moment i will b...

Great :) ,will you get any head flow numbers ? Since they use CFD programs and such @ MCE they must have done a before and after head flow test ?I would like to compare it to my results of the ported head by Endyn.Also what cam are you going to use? nope emile has not done a before head flow test b...

i finished my oil pump and the thread size was G1/2" i'm waiting for my main bearings to come in ordered them at summit racing (saves u a lot of money) ordered clevite 77 bearings. the pushrodbearings i ordered at honda the cilinderhead is on it's way to the coating guy to ceramic coat my combu...

I know it's a M20 or M22 size just a regular Metric size.Can't remember which one exactly.But i know cause i used the plug from an old oil pump to plug some other thread of M20 or M22 size. I didn't said to balance the clutch plate ,you can't even do that and that would be stupid indeed.But if you'...