Page 2 of 4
Re: EJ9 Suspension and Chassis specification
Posted: Tue Oct 20, 2009 11:58 am
by kbartlett1888
nice post mate!
my car is booked on the 9th of November to get a "full suspension geometry setup" and also getting my control arms fitted. should be handling like a dream!
Re: EJ9 Suspension and Chassis specification
Posted: Sat Aug 14, 2010 11:18 pm
by BETEK
saxophonias wrote:
This is the Eg/mb/ma/ style front lower control arms.
Please verify that.
Also the USDM civics have that control arms excluding the 99-00 SI
Re: EJ9 Suspension and Chassis specification
Posted: Sat Aug 14, 2010 11:20 pm
by BETEK
Thats why the Civics need lowering
Re: EJ9 Suspension and Chassis specification
Posted: Thu Mar 03, 2011 1:32 am
by BETEK
Re: EJ9 Suspension and Chassis specification
Posted: Sun Mar 06, 2011 7:13 pm
by Dodo Bizar
Dude, the rim is nearly touching!
Re: EJ9 Suspension and Chassis specification
Posted: Sun Mar 06, 2011 7:23 pm
by BETEK
Haha yes, the driver didn't seem to be scared. I am impressed
Re: EJ9 Suspension and Chassis specification
Posted: Sun Mar 06, 2011 11:52 pm
by saxophonias
extremely high suspension travel
Re: EJ9 Suspension and Chassis specification
Posted: Mon Aug 13, 2012 11:05 am
by sktaroins
interesting info
Re: EJ9 Suspension and Chassis specification
Posted: Thu Oct 25, 2012 7:58 pm
by BETEK
mynameisowen wrote:
Some dimensions of the spring:
1. Spring outer diameter i.e. the diameter of the outer circumference of the spring when looking in plan (2D) view.
2. Spring coil diameter i.e. of each individual coil.
3. Number of turns of the spring i.e. how many full coils are the in the spring
Note that I cannot accept measurements from progressive springs since they have varying spring stiffness.
EJ9 1998
Front Springs
1. 96.5mm
2. 11.4mm
3. 10
4. 360mm total spring length
Rear Springs
1. 97.8mm
2. 10mm
3. 10
4. 360mm total spring length
Re: EJ9 Suspension and Chassis specification
Posted: Fri Oct 26, 2012 8:51 pm
by BETEK
mynameisowen wrote:
I need measurements for the dimensions on the image:
Picture on left is view from front of vehicle of the suspension. View on right is view from roof of the vehicle ("birds eye view") of the ARB.
A - Ball joint to lower wishbone inboard (LWB) bush
B - spring/damper mount to LWB inboard bush
C - ARB mount to LWB inboard bush
D - ARB LWB mount seperation distance
E - ARB subframe chassis mount seperation distance
F - ARB wishbone "short" length
G - ARB wishbone "twish length"
Couldnt think of better names for some of them ;p
civic ej9 suspension dimensions
Front (* E: The dimension is from the center of the ARB mounts. Elsewhere the dimension from inner edge to edge from ARB mounts is 750mm)
Rear
