www.dodo-upgrades.nl

Ek3 (D15Z6) swaybar is a direct fit on the front also?
Cheers

Is it bigger than the one of d14? It's worth adding the 26mm of the ek9 ek4

saxophonias wrote:Is it bigger than the one of d14? It's worth adding the 26mm of the ek9 ek4

it is the front swaybar !
Ej9 doesnt have one but Ek3 has.
I would consider to install one of those if it is a direct fit
cheers

Yours didn't have a front swaybar? Is it a 97model? Mine came with 22mm swaybar. If we share the same lower control arms then it is a direct fit. Any photos?

mine 97 model doesnt have it...
post photos of LCAs soon.
cheers

This EK style LCA with the fork and the 26mm swaybar

Guys i need help...do you know any aftermarket front swaybars for my ej9???
for the back,maybe i'll have the cusco swaybar kit,and the cusco lower arm bar...does anyone of you have this setup???

you don't need more than 26mm i think in front, so the ek4/9 swaybar is good. The hondas rear swaybars you can use are 12-13m from ek4 and then various aftermarket varying from 16-19-22-24mm. What size are the cusco ones? You need supporting braces if you go more than 13mm

I will cut the bar support from the LCAs from an Ek4 and solder them on mines soon if i can get a swaybar. Post pics. Cheers

I hope you mean welding instead of soldering .
My 1998 ej9 has a stock 22mm swaybar ,my friends 97 ej9 didn't had a front swaybar.I'm using the EK9 front and rear swaybar at the moment.26mm front and 22mm rear with brace support.Very good stuff