www.dodo-upgrades.nl

hi!
Do Itr brake master Cylinder fit to honda civic 99 without ABS?
and if i change i need the booster?
tnx!

96-97 JDM ITR's have the 1" mc but with a 10mm/12mm fitting, you can't put this on any eg/ek without double flaring 1 brake line

98+ acura integra gsr/itr and all jdm itr 98spec and up have the 1" mc with both 10mm fittings, which are direct bolt-on for the eg/ek

but you have to be careful about usdm or jdm, because the fittings will be on the wrong side if you get the wrong one, the brake line on the side will be on the opposite side if it was from a USDM car, which is what LHD car's want

for the 96-00 civics using the 98spec mc/bb, you would have to buy one from a USDM car, since the brake line fitting will actually hit the shock tower if you get a JDM unit, EG/DC's can use jdm/usdm mc's with no problem. Im not to sure about non ABS application, id say joris (dodo) wud be the man to ask!

you can buy replica master brake cylinders for 30e that do the job

Sorry, no frikkin idea about the brake master cyl...

ok tnx
i look for one of those!

i dont have ABS it's matter if i buy itr master cylinder ABS?

saxophonias wrote:you can buy replica master brake cylinders for 30e that do the job

where?

you can find some replicas ones on http://www.ek9.org. as soon as i find the link i will post it.
Joris this is for reinforcing the rigidity of the brake cylinder by tighting it on the engine frame


edit.http://www.ek9.org/forum/wheels-tires-s ... osted.html

saxophonias wrote:you can find some replicas ones on http://www.ek9.org. as soon as i find the link i will post it.
Joris this is for reinforcing the rigidity of the brake cylinder by tighting it on the engine frame


edit.http://www.ek9.org/forum/wheels-tires-s ... osted.html

LOL. i read your post fast and i understand that are a after-market 1"mc . not the 1"mc brake.

anyway, here in Portugal we can find this that you show, but i don´t like it

i prefer something like this:

for how much?