Specifications of stock ej9 braking system and wheels
- saxophonias
- Posts: 2590
- Joined: Fri Jul 03, 2009 6:03 am
Re: Specifications of stock ej9 braking system and wheels
use better pads for starters. 262mm won't fit in a 13inch wheel
Re: Specifications of stock ej9 braking system and wheels
Yes it is worth to paying for aftermarket pads discs for 13'' wheels because in short time they will be crooked.mynameisowen wrote:I have the 13" wheels (1996 civic). What is my best option for increasing brake performance? Is it worth paying for aftermarket pads/discs? Should I do as BETEK suggests and use MG ZS brake setup? Or should I convert to the 14" wheels and brakes (is this even possible)??
If you want to put bigger discs you will need new knuckles to support the new calipers (bigger).
First step for improving the brake system is to put the discs with 262mm diameter and high pressure brake hoses. Then to swap rear discs.
- saxophonias
- Posts: 2590
- Joined: Fri Jul 03, 2009 6:03 am
Re: Specifications of stock ej9 braking system and wheels
from brembo site specs about the pads
![Image](http://i2.photobucket.com/albums/y15/andy905/brembopads/pads_header_spec.jpg)
![Image](http://i2.photobucket.com/albums/y15/andy905/Brembo%20Brake%20Parts/P28024.jpg)
P28024
Cross References to the following other Leading Brands:
Tecdoc 05197
Ferodo FDB777
Mintex MDB1615
Bendix 0
Bosch 0
Apec PAD1140
Texstar GDB1164
Zimmerman 0
TRW GDB1164
![Image](http://i2.photobucket.com/albums/y15/andy905/brembopads/pads_x_top.jpg)
ferodo fdb777 specs
![Image](http://infodozer.com/catalogs/ferodo/images/11365.jpg)
![Image](http://img826.imageshack.us/img826/5372/fdb777.jpg)
2nd option
![Image](http://i2.photobucket.com/albums/y15/andy905/Brembo%20Brake%20Parts/P28023.jpg)
![Image](http://i2.photobucket.com/albums/y15/andy905/brembopads/pads_x_top.jpg)
P28023
Cross References to the following other Leading Brands:
Tecdoc 05199
Ferodo FDB776
Mintex MDB1610
Bendix 0
Bosch 0
Apec PAD815
Texstar GDB1183
Zimmerman 0
TRW GDB1183
ferodo fdb776
![Image](http://img801.imageshack.us/img801/2884/fdb776.jpg)
![Image](http://i2.photobucket.com/albums/y15/andy905/brembopads/pads_header_spec.jpg)
![Image](http://i2.photobucket.com/albums/y15/andy905/Brembo%20Brake%20Parts/P28024.jpg)
P28024
Cross References to the following other Leading Brands:
Tecdoc 05197
Ferodo FDB777
Mintex MDB1615
Bendix 0
Bosch 0
Apec PAD1140
Texstar GDB1164
Zimmerman 0
TRW GDB1164
![Image](http://i2.photobucket.com/albums/y15/andy905/brembopads/pads_x_top.jpg)
ferodo fdb777 specs
![Image](http://infodozer.com/catalogs/ferodo/images/11365.jpg)
![Image](http://img826.imageshack.us/img826/5372/fdb777.jpg)
2nd option
![Image](http://i2.photobucket.com/albums/y15/andy905/Brembo%20Brake%20Parts/P28023.jpg)
![Image](http://i2.photobucket.com/albums/y15/andy905/brembopads/pads_x_top.jpg)
P28023
Cross References to the following other Leading Brands:
Tecdoc 05199
Ferodo FDB776
Mintex MDB1610
Bendix 0
Bosch 0
Apec PAD815
Texstar GDB1183
Zimmerman 0
TRW GDB1183
ferodo fdb776
![Image](http://img801.imageshack.us/img801/2884/fdb776.jpg)
- saxophonias
- Posts: 2590
- Joined: Fri Jul 03, 2009 6:03 am
Re: Specifications of stock ej9 braking system and wheels
when i get home in a few days i will clarify which ferodos i have as i have a used part lying in my
garage. FDB 776 are bigger but they maintain the same shape. ej9 civics with the 262mm must have fdb 776 if i am right
garage. FDB 776 are bigger but they maintain the same shape. ej9 civics with the 262mm must have fdb 776 if i am right
- Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: Specifications of stock ej9 braking system and wheels
I think I actually had the 776 once...
And I see I need to correct myself. Though years ago my garage claimed VTi pads did not fit, my latest refit I did myself. I ended up with OEM EK4 pads being a perfect fit and braking excellent for street purposes. So 262 calipers on my EJ9 are equal to EK4.
Now the EK4 pads were indeed slightly bigger than the previous aftermarket Delphi pads I had... but I've been told this might be that I actually had gotten Rover pads or something alike. And yes with the slightly bigger pads I was worried first they might get stuck or anything, but when you put them in nicely you still can do with two fingers never mind the tight fitment.
And I see I need to correct myself. Though years ago my garage claimed VTi pads did not fit, my latest refit I did myself. I ended up with OEM EK4 pads being a perfect fit and braking excellent for street purposes. So 262 calipers on my EJ9 are equal to EK4.
Now the EK4 pads were indeed slightly bigger than the previous aftermarket Delphi pads I had... but I've been told this might be that I actually had gotten Rover pads or something alike. And yes with the slightly bigger pads I was worried first they might get stuck or anything, but when you put them in nicely you still can do with two fingers never mind the tight fitment.