Which tyre size and wheel to choose?

The last important bits between your car and the street
User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: Which tyre size and wheel to choose?

Post by saxophonias »

yeap 38 is pretty often used!

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Which tyre size and wheel to choose?

Post by mynameisowen »

OK thanks guys, do you know what our EJ9 offset is?
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

Acc3l3ratoR
Posts: 126
Joined: Sun Jan 30, 2011 3:42 pm

Re: Which tyre size and wheel to choose?

Post by Acc3l3ratoR »

mynameisowen wrote:OK thanks guys, do you know what our EJ9 offset is?
et 45 is written on my stock rims...

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Which tyre size and wheel to choose?

Post by mynameisowen »

Thanks for that! Is that EJ9? Steel wheels?
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

Acc3l3ratoR
Posts: 126
Joined: Sun Jan 30, 2011 3:42 pm

Re: Which tyre size and wheel to choose?

Post by Acc3l3ratoR »

yap ej9 stock alloy wheells...

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Which tyre size and wheel to choose?

Post by mynameisowen »

Okay so knowing that changing the offset has an affect on the Scrub Radius (SR) I want to calculate the change, I need some vital information though, can anyone help with:

1. The stock EJ9 Kingpin Inclination

2. The stock EJ9 Scrub Radius


As a FWD car our EJ9's should be set-up with a negative scrub radius, the wheels I'm looking at are offset 35. So my scrub radius should be 10mm lower (less positive) with these wheels. As SR tends to 0 you decrease your steering feel so I want to make sure I go too low. Anyone with 35 offset wheels can feedback to me on this?
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: Which tyre size and wheel to choose?

Post by saxophonias »

My 35et wheels tend to give a more live feedback to the steering as it tends to read the road more.

Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Re: Which tyre size and wheel to choose?

Post by Law_ »

Does someone know a good winter tire for R14 wheels?
Thanks !

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: Which tyre size and wheel to choose?

Post by saxophonias »

For a couple of years now I have been using the stock tyre size 185/60/14 comparing to the 185/55/14 that I used to for many years. For sure it is more economical and comfy, but on the other hand it is less agile when it comes to corners. It is something you get used to or if your tyre sidewalls are strong enough you don't notice the difference.

Post Reply