Specifications of stock d14 gearboxes

Between power and road surface lies a crucial step, transmission makes you go or not
User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: Specifications of stock d14 gearboxes

Post by Dodo Bizar »

Correct.

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: Specifications of stock d14 gearboxes

Post by BETEK »

mynameisowen wrote:Just to clarify, 4.250 would have higher acceleration than 4.058 no??
Yes, also the consumption of fuel is higher :mrgreen:

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Specifications of stock d14 gearboxes

Post by mynameisowen »

How much noticeably worse fuel economy??
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: Specifications of stock d14 gearboxes

Post by BETEK »

mynameisowen wrote:How much noticeably worse fuel economy??
Not many, but it depends from driving style in any case.

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: Specifications of stock d14 gearboxes

Post by BETEK »

Below are the specs from Honda HR-V 2WD.
The most close ratio gearbox from any other D series gearbox.
But it doesn't fit at ej9s because the changing mechanism is with cables.

Transmission gear ratio
1 speed 3.500
2-speed 1.956
3-speed 1.344
4-speed 1.071
5-speed 0.812
Final Drive Ratio 4.562

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: Specifications of stock d14 gearboxes

Post by Dodo Bizar »

Ah I always wondered if it could fit... perhaps the gears can be interchanged?

hondaNickx
Posts: 713
Joined: Wed Aug 05, 2009 1:06 am
Location: Belgium

Re: Specifications of stock d14 gearboxes

Post by hondaNickx »

I don't think you could swap anything from that.The engines are the same ones as used in the Civic EP1 EP2 EM2 they also work with cable transmissions.Gearbox is different i don't know about the gears themself but it's easier to just get CRX D16a9 3th and 4th (1.346 and 1.033) and swap those in .Those are easier to find too then a HR-V gearbox.
2nd gear can't be swapped out anyway ,only the final drive would be something interesting.

The largest oem D-series Final drive at the moment is the D13 final drive of 4.4 so that 4.5 final drive would be something special.
Mfactory also makes 4.5 4.7 and 4.9 final drives but those are expensive.
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: Specifications of stock d14 gearboxes

Post by BETEK »

hondaNickx wrote:I don't think you could swap anything from that.The engines are the same ones as used in the Civic EP1 EP2 EM2 they also work with cable transmissions.Gearbox is different i don't know about the gears themself but it's easier to just get CRX D16a9 3th and 4th (1.346 and 1.033) and swap those in .Those are easier to find too then a HR-V gearbox.
2nd gear can't be swapped out anyway ,only the final drive would be something interesting.

The largest oem D-series Final drive at the moment is the D13 final drive of 4.4 so that 4.5 final drive would be something special.
Mfactory also makes 4.5 4.7 and 4.9 final drives but those are expensive.
About the engine of HR-V are more close to our D series 96-00 rather than EP ones.
The countershaft from hrv is the same with the CRV 1st gen (B-series) :shock: (OEM part number 23220PBW000)
Also have some same gears 2,3,4 and synchronizers :shock: and same gear ratios
It seems like that the hrv gearbox is strong enough like the B-series gearboxes and also short :shock:
HRV gearbox is undercover B-series transmission in D-series case :)

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: Specifications of stock d14 gearboxes

Post by saxophonias »

so can it be swapped or not?

User avatar
SquirtAndSpark
Posts: 172
Joined: Wed Aug 05, 2009 9:39 am

Re: Specifications of stock d14 gearboxes

Post by SquirtAndSpark »

nice information :P

can be use the cables like in the K swap ?

Post Reply