D14 with D16Z6 gearbox

Between power and road surface lies a crucial step, transmission makes you go or not
boggs
Posts: 44
Joined: Wed Oct 07, 2009 8:19 pm

D14 with D16Z6 gearbox

Post by boggs »

I have been offerd a D16Z6 gearbox locally for a decent price was just wondering is it a worth while swap to do on to my D14 and is there much of a difference?

Thanks

User avatar
cad civic mechanic
Posts: 140
Joined: Mon Jan 18, 2010 8:08 pm
Location: Bangor N.I

Re: D14 with D16Z6 gearbox

Post by cad civic mechanic »

boggs wrote:I have been offerd a D16Z6 gearbox locally for a decent price was just wondering is it a worth while swap to do on to my D14 and is there much of a difference?

Thanks
Not sure about this one hondanick or jorris (dodo) would be the ones to ask
Dont slack her till you wreck her, horse on regardless

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: D14 with D16Z6 gearbox

Post by BETEK »

Below are the gear ratios of d16z6 and d14s and comparisson table between them
So you will have a little bit better acceleration

Image

D14A3/4 Z2/3 GEARBOX
1--3,250:1
2--1,909:1
3--1,250:1
4--0,909:1
5--0,702:1
FD--4,058


Image

Gear calculator
http://www.teammfactory.com/gear-calculator

boggs
Posts: 44
Joined: Wed Oct 07, 2009 8:19 pm

Re: D14 with D16Z6 gearbox

Post by boggs »

BETEK wrote:Below are the gear ratios of d16z6 and d14s and comparisson table between them
So you will have a little bit better acceleration

Image

D14A3/4 Z2/3 GEARBOX
1--3,250:1
2--1,909:1
3--1,250:1
4--0,909:1
5--0,702:1
FD--4,058


Image

Gear calculator
http://www.teammfactory.com/gear-calculator
Thanks alot for that reply mate really helped alot. I see the difference in ratios is only in second gear and a difference in the final drive? This makes me think the difference will only be slightly noticable if even in second gear and may not be worth the hassle?

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: D14 with D16Z6 gearbox

Post by BETEK »

Personally I would prefer to swap a gearbox from D14A6/7/8
it gives more acceleration :)
The good point for d16z6 gearbox is that has stronger differential bearings than d14s and from d16y7
Image

User avatar
cad civic mechanic
Posts: 140
Joined: Mon Jan 18, 2010 8:08 pm
Location: Bangor N.I

Re: D14 with D16Z6 gearbox

Post by cad civic mechanic »

Good info betek 8-) thanks
Dont slack her till you wreck her, horse on regardless

User avatar
saxophonias
Posts: 2592
Joined: Fri Jul 03, 2009 6:03 am

Re: D14 with D16Z6 gearbox

Post by saxophonias »

i have always wanted to swap the 2nd and 3rd gears from my old d14a4 gearbox to the d14a8 that i have installed but my mechanic has told me that it cannot be done. Anyone that has actually seen the gearbox opened can verify?

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: D14 with D16Z6 gearbox

Post by BETEK »

I think it is possible to swap gears from d14a4 to d14a8 gearbox.
They have the same synchronizers and some other same parts
So the difference is at gears and at the final drive set

Part number 23521-P20-315 SLEEVE SET, SYNCHRONIZER (1-2), at the fist picture the number 7
Part number 23623-P4A-305 SLEEVE SET, SYNCHRONIZER (3-4), at the second picture number 7
Part number 23626-PL3-325 SLEEVE SET, SYNCHRONIZER (5), at the second picture number 8

Image

Image

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: D14 with D16Z6 gearbox

Post by mynameisowen »

Great info BETEK :)
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

mr kawa
Posts: 60
Joined: Sun Jan 20, 2013 11:35 am

Re: D14 with D16Z6 gearbox

Post by mr kawa »

So i was wondering. I came across a s20 transmission from a d15. But now when i see the final is a bit lower...what does this meen? Will it go slower than my original s40 transm? And will it make a difference?

Post Reply