Page 1 of 1

D14A4 clutch on D13B2 flywheel on D16Z6 gearbox on D14A4

Posted: Fri Nov 02, 2012 4:24 am
by Heltfeil
As in topic, would there be any compatibility issues with a D14A4 clutch on D13B2 flywheel on D16Z6 gearbox on D14A4 engine?

Actually Its only the D14A4 clutch on D13B2 flywheel that I'm not 100% sure about.

I know the D13B2 {EG3 chassis) got flywheel with 20 splines and 200mm clutch-face (or whateve its called), but the problem is that the D14A4 supposedly came with both the 200mm clutch and the 215mm (or 212mm as I see some here call it). If this inconsistency correlate with the inconsistency in D14A4's final gears (some have 4.25 and some 4.058}, we could be on to a way to identify wich of those boxes we had, without having to drive around braking the speedlimit while we alternate our focus between the gps and our calculator ;)

But I know some of you have gone for an aftermarket flywheel, and could possibly measure their stock flywheel and help me out figuring if it has the same 200mm face as the D13B2.

All help is appreciated :)

Re: D14A4 clutch on D13B2 flywheel on D16Z6 gearbox on D14A4

Posted: Sat Nov 03, 2012 4:29 am
by sktaroins
see from my side a D16Z6 gear box is bigger than the D14A4 gear box - you can still do the fitting to the engine bay though - its not an issue.

if ur working with the D16Z6 gear box as a whole then might as well just fit it to the engine bay of the D14.

the d13 fly wheel and the d14 fly wheel are different in sizes bro .

i know ur talking abt the d14 clutch on d13 fly wheel - but i didnt understand wht u meant.
did u mean d14 clutch on d13 engine - this makes more sense..!

anyhow lets get back to the topic - i see ur mixing alot of components man.

okay iam with you - get the D16Z6 gear box empty .. put the d14 clutch in it and the d13 fly wheel too.

why i say this - just bcoz they all fit inside the d16z6 gear box simply bcoz the gear box of the d16 is big -- but YES all those components ARENT MIXABLE - manily bcoz its output is low . so defiently a no.

you cant put a d14a4 clutch with d13flywheel in a d16 gearbox and all this conected to the d14 engine-
i understand what ur trying to - iam saying they all fit and you can do it but i dont think its gona give u the power ur looking for mainly bcoz the components do not match in the gearbox - meaning - you cant have a box with a small clutch in it - it doesnt make sense does it?

simply just get the d14 engine and the d16 gear with its clutch with a light fidanza wheel for the d16 but im not sure as i havent herd abt a setup like this before. -

u have a d14a4 engine with its gear i belive right?
what setup u currently have - plz post some pics too :)

cheers

Re: D14A4 clutch on D13B2 flywheel on D16Z6 gearbox on D14A4

Posted: Sat Nov 03, 2012 11:26 pm
by saxophonias
I think it can fit. But Betek could help for sure who is digging into honda service manual.