Error Scan

Wiring up and working with the D14 ECUs
Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Error Scan

Post by Law_ »

Hi :) i've made a scan for my ECU errors and there were three. i've already disconnected battery for 20min but the errors are still there
They appear with the ABS light, not the SRS, not the engine light.
They are the

16 - Fuel Injector System
defective circuit or unplugged / defective fuel injector

54 - CKF Sensor (Crankshaft Speed Fluctuation)
defective circuit or unplugged / defective sensor

61 - Oxygen Sensor, Heated - Sensor 1 (Primary)
high voltage, low voltage, or slow response.

The car seems fine. It does 6.5 L / 100 km. It runs vert nice, frequent 7000rpm just when hot obviously but seems ok. Top Speed @ 4th Gear easily achieved. Dont know what to think about that...

Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Re: Error Scan

Post by Law_ »

BTW... for anyone wanting the codes here they are.

http://hybrid.honda-perf.org/tech/codes.html

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: Error Scan

Post by saxophonias »

Weird. Do you have a tester or did you count the blinking of the light?

Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Re: Error Scan

Post by Law_ »

Just the blinks...

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: Error Scan

Post by Dodo Bizar »

Ehr weird, what is you setup? No CKF sensor anymore? The code 16 is really weird and should not be unless serious something wrong in the injector department. Oxigen sensor code 61, also new for me... is it the code you get with OBD2b when having no more catalyc converter or something (just throwing some guesses now).

Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Re: Error Scan

Post by Law_ »

electronics and the rest is stock... no setup already. it is weird for me. the light that blinks is the ABS one. is that suppose to happen?

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: Error Scan

Post by Dodo Bizar »

Ehm no, your CEL or MIL light should flash... the engine error check light which comes on a sec before you start the car.

The ABS light should mean AB doesS errors... I think.

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: Error Scan

Post by saxophonias »

A friend's d15z had problems with his abs light coming on. Have you checked if the abs is working right?

Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Re: Error Scan

Post by Law_ »

The ABS is working right but i had some problems trying to pull the handbrake making handbrake turns. the ABS light comes on when the tail slips and does not turn off... Just when i restart the car...
i've disconnected the battery for 20min or so and did the right procedure, letting the car warming without touching the pedals until the cooling fan starts 2 times. the erros did not erase.
My CEL light or SRS light did not blink, so guess is an ABS error?
Thank you all

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: Error Scan

Post by Dodo Bizar »

Hahaha, ABS is supposed to throw an error when the rear blocks. During dyno sessions with ABS cars the light always comes on. But after normal driving a while (and a restart) it should not come back at all. Unless another wheel lock happens at the aft.

Post Reply