Page 8 of 9

Re: D14 obd1 conversion => D16y7 ?

Posted: Mon Jun 14, 2010 9:10 am
by baz
Mm ok, will at that today! And post some pictures here. :|

Re: D14 obd1 conversion => D16y7 ?

Posted: Mon Jun 14, 2010 9:14 am
by baz
I found this thread on D-series.org

http://www.d-series.org/forums/engine-m ... -iavc.html

Re: D14 obd1 conversion => D16y7 ?

Posted: Wed Jun 16, 2010 6:55 pm
by baz
Some help to identify this connectors is welcome. :)


Image

Image

IACV?
Image

Image

Image

Image

Image

Image

Image

Re: D14 obd1 conversion => D16y7 ?

Posted: Wed Jun 16, 2010 7:22 pm
by ilya
starter\alternator? in hour i give u some IMG u could find UR connector. what is engine and what car? exmple:
D16Z6 - DEL SOL 1995.

Re: D14 obd1 conversion => D16y7 ?

Posted: Thu Jun 17, 2010 11:20 am
by Law_
It is D16Y7 Honda Civic Coupe 97

Re: D14 obd1 conversion => D16y7 ?

Posted: Thu Jun 17, 2010 2:08 pm
by baz
Law_ wrote:It is D16Y7 Honda Civic Coupe 97
It should be yes

Re: D14 obd1 conversion => D16y7 ?

Posted: Thu Jun 17, 2010 9:02 pm
by hondaNickx
baz wrote:Some help to identify this connectors is welcome. :)


Image I think this cable goes on the starter engine ,cause that's the only plug i can recall that has that type of connection.It should have had a black insulation around it in oem state.

ImagePCS sensor


Image IACV Sensor

ImageIAT sensor

Image

Image VSS sensor

ImageLambda sensor

ImageTPS sensor

Image
MAP sensor

Re: D14 obd1 conversion => D16y7 ?

Posted: Fri Jun 18, 2010 5:08 pm
by baz
@ nick, Thank you very much! This helps allot 8-)

Re: D14 obd1 conversion => D16y7 ?

Posted: Sun Jun 20, 2010 7:41 pm
by hondaNickx
No problem ;) , i can verify to everyone this works well.I haven't got any problems anymore with my engine holding back and such.I had some problems with my previous (cut and solder) obd1 harnas after i removed it and put it back.But that's all solved now with the y7 engine harnas.

Re: D14 obd1 conversion => D16y7 ?

Posted: Thu Jul 01, 2010 12:28 pm
by mynameisowen
hondaNickx wrote:No problem ;) , i can verify to everyone this works well.I haven't got any problems anymore with my engine holding back and such.I had some problems with my previous (cut and solder) obd1 harnas after i removed it and put it back.But that's all solved now with the y7 engine harnas.
Great news, maybe you could do a little write up on it?

Just like a parts list and sensor locations :D