Page 4 of 6

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Mon May 30, 2011 8:43 pm
by mynameisowen
hmmm If its not from the head the only other thing i can think of is spark plug? Or from upstream, maybe check your air filter?

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Mon May 30, 2011 8:48 pm
by BETEK
+1 :)
This item seems that passed from air filter (?)
I don't sure but it isn't something from engine
Did you check the throttle body, spark plugs?

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Mon May 30, 2011 11:13 pm
by cad civic mechanic
mynameisowen wrote:hmmm If its not from the head the only other thing i can think of is spark plug? Or from upstream, maybe check your air filter?
BETEK wrote:+1 This item seems that passed from air filter (?)
I don't sure but it isn't something from engine
Did you check the throttle body, spark plugs?
Possible piston ring fragment or melted spark plug electrode ? :roll: Hope you get to the bottom of what caused it soon

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Tue May 31, 2011 7:40 pm
by ilya
I dont know what is it, it is not spurk plug...
but it realy clean my piston. look in foto, 1 cilynder.
ps. i complete D16Z6 CHead: new valve, some sensor... d16z6 and d14a4 CHead realy same)

Image

my realy "new" friend
Image

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Tue May 31, 2011 8:28 pm
by ilya
also i complete (90%) wiring plan P3Y->P28
and... i find some on me P3Y ECU

for INFO: D14A4 - S4PA ATGear
D16Z6 - M24A ATGear... i know some who swap in VI civic s4pa with m24a. it same.

i havent some wire it is
A17 - FANC
A18 - ALTC
A11 - PSPSW
D17 - ELIMA

and all NONE - A3,D12,D14,D19

also i have some trouble with at wiring:
on P3Y i have 5 Wire
A8 - LCB
A9 - LCA
A22 - ATPNP (neutroul or parking)
D5 - ATPD3
D16 - ATPD4

but in P28 i find only 3 wire, and 2 for TCM (box for some AT gearbox)

B3 - AFSA - maybe LCA, or ATPD3
B4 - AFSB - maybe LCV, or ATPD4
B7 - PN - it ATPNP (For start engine)
-A18 TCM
-D18 VREF

ok with 3 first i start engine, and go forward. but,,, what i must do with ATPD3 and ATPD4... i need 3 and 4 gear))) i dont wand cool VTEC with 1,2 GEARS)))
realy i litle sad with... i dont know what i must do with. i ready for swap, i have dizy, jets, heads, i have all and only 2 fucking wire(

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Tue May 31, 2011 9:48 pm
by ilya
YES! I FIND IT)))

OBD1 - p3y
------------
A17 - LCB (A8) ASFA Green\Black
A19 - LCA (A9) ASFB Yellow
B3 - ATDP3 (D5) ? Pink
B4 - ATDP4 (D16) yellow
B7 - ATPNP (A22) Clutch light aqua (green)

D10 - Not connected ELD (it's ok - ED 2012)
D18 - Not connected (u dont have this)

I'M FIRST WHO DID IT!!!
FIRST AT IN WORLD
CIVIC WITH VTEC IN D14XX

-------
ready for start swap)))))))))))))))))))))))))))))))))))

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Wed Jun 01, 2011 12:47 am
by BETEK
I wish the best, keep going ;)

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Wed Jun 01, 2011 5:54 pm
by mynameisowen
Good luck man. I wish I could help you but the language barrier doesn't help :(

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Wed Jun 01, 2011 6:47 pm
by ilya
thanx man) now have one problem - splitter. I read DoDo article, but some dont understand. need more scheme.

Re: [LOOK IT] Step 2. Swap Dizzy + OBD1

Posted: Thu Jun 02, 2011 10:52 pm
by Dodo Bizar
Open up the splitter and look very carefully were the metal pieces connect the wires, you'll be able to see what it does.