a/c bearing going bad
-
mynameisowen
- Posts: 1307
- Joined: Thu Aug 20, 2009 3:38 am
- Location: London or Oxford, England
- Contact:
Re: a/c bearing going bad
This guy can dig out a schematic of any part of any honda!
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
-
saxophonias
- Posts: 2590
- Joined: Fri Jul 03, 2009 6:03 am
Re: a/c bearing going bad
guys i just replaced the aftermarket a.c belt (continental) with the oem one the noises are gone. It's a pitty i had been changing the bearings like that. I would never have thought that a non oem belt would make such of a difference.. And i could swear that the noise is coming from the a/c bearing. If only you could hear it.
Re: a/c bearing going bad
Good news man 
Honda OEM stuff is the best at 99% from any other after-market part
Honda OEM stuff is the best at 99% from any other after-market part