PART NUMBERS FOR EJ9

Any issues? Discuss them here
User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

PART NUMBERS FOR EJ9

Post by BETEK »

This is a catalogue with OEM Honda Part Numbers that made especially for EJ9 Civics with the basic service stuff.


If there is something missing from the list you can post it. After it will be included on the catalogue.
Also you can post photos of the OEM stuff (better if they will be have original packaging)*

Of course feel free to make any correction and comment for improving the catalogue.
Additionally we can add/make a new catalogue with part numbers and photos about the parts that fit or improve the EJ9 Civics.
So if you want, you can post the photos of the improving/fiting Honda OEM parts here (in this thread) and then they will be settled.


*Please, if you posting the photos of the parts write firstly the description of the part and then the number of the part and finally add the photo. See below, as reference, the third post after part numbers

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

The OEM Service Stuff for EJ9 (with Part Numbers)

Post by BETEK »

Air Filter
17220-P2A-005

Fuel Filter
16010-ST5-933

Oil Filters
15400-PR3-405 Toyo Roki
15400-PR3-406 Toyo Roki with it’s installation key (catridge)
15400-PR3-003 Tsuchiya
15400-PT1-K04 Tsuchiya
15400-PT1-K01 Acap
15400-PH1-F03 Labinal-Purflux

Oil Drain Plug Washer [14mm] Engine-Gearbox
94109-14000

Oil Drain Plug Washer Gearbox
94109-20000 (20mm) for Manual
90471-PX4-000 (18mm) for Auto

Cabin filter*
79831-S04-003 Without A/C
80291-ST3-505 With A/C


Spark Plugs
98079-5614E BKR6E-11 NGK --> `96-`98 models
98079-5514E BKR5E-11 NGK --> `96-`98
98079-5615E K20PR-U11 Denso --> `96-`98
98079-5515E K16PR-U11 Denso --> `96-`98
98079-5514P ZFR5J-11 NGK --> `99-`00
98079-5515G KJ16CR-L11 Denso --> `99-`00

Spark Plug Cords/Wires Set
32722-P2A-J01 Nichiwa Kiki
32722-P2A-003 Sumitomo

Throttle Body Gasket
16176-P3X-G01 Nippon Leakless The restrictor on 75bhp engines `96-`98
16176-P3X-G02 Nippon Leakless The restrictor on 75bhp engines `99-`00
16176-P2A-004 Nippon Leakless The normal gasket for 90bhp engines

Intake Manifold Gasket
17105-P2A-004 Nippon Leakless
17105-P2A-014 Nippon Leakless
17105-P2A-013 Ishino Gasket

Exhaust Manifold Gasket
18115-P2A-003 Nippon Leakless
18115-P2A-004 Ishino Gasket

Headgasket
12251-P2J-004 Nippon Leakless

Valve Cover’s Gasket
12341-P2A-000

Cylinder Block’s Gasket Kit
06111-P2A-010

Cylinder Head’s Gasket Kit
06110-P2A-020 `96-`98 models
06110-P2A-030 `99-`00 models

Oil Pan Gasket
11251-P2A-014 Otsuka

Thermostat Gasket
19305-PT0-000

Thermostat Set (with gasket)
19301-P10-307 Robertshaw Tennesse Div.
19301-P08-316 Nippon Thermostat
19301-P08-315 Fuji Thomson

Water Pump (includes gasket)
19200-P2A-A01 Yamada
19200-P2A-A02 Keihin

Water Pump Gasket
19222-P08-004 Yamada
19222-P2A-004 Keihin

Timing Belt
14400-P2A-004

Tensioner
14520-P2A-305 Koyo Seiko
14520-P2A-306 Nippon Seiko

Alternator Belt
31110-P2A-003 Bando (Bando numbering --> 4PK800 )
31110-P2A-004 Mitsuboshi

Steering Pump Belt
56992-P2A-003 Bando (Bando numbering --> 4PK845 )
56992-P2A-004 Mitsuboshi

A/C belt
38920-P2A-003 Bando (Bando numbering --> 4PK820 )

Clutch Disk
22200-P3Y-005

Clutch Pressure Plate
22300-P2Y-005

Clutch Release Bearing
22810-P20-005 NSK
22810-P20-003 Fujikoshi

Flywheel Bearing
91006-634-008 NTN

Flywheel Oil Seal
91214-PH1-013 NOK 80x100x10
91214-PH1-004 Arai 80x100x10

Camshaft Oil Seal (near the Pulley)
91213-PE1-722

Oil Pump Seal
91212-P01-003 NOK 31x46x7 `96-`98 models
91212-P7A-004 ARAI 31x46x7 `99-`00

O-ring Distributor to Camshaft
30110-PC6-005 `96-`98 models
30110-PA1-732 `99-`00

Oil Presure Switch
37240-PT0-023 Denso
37240-PT0-014 TEC

Brake Pads (front axle)
45022-S04-505 For 240mm Discs
45022-S04-V11 For 262mm Discs

Brake Shoes (rear axle)
43153-S04-A01 Without ABS
43153-ST0-J01 For ABS
43053-ST0-E50 For ABS `00 models

Brake Discs (front axle)
45251-SR3-A10 diameter 240mm
45251-SK7-J00 diameter 262mm
45251-SK7-A10 diameter 262mm

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: The OEM Service Stuff for EJ9 (with Part Numbers)

Post by BETEK »

Exhaust Manifold Gasket
18115-P2A-003 Nippon Leakless
Image

Throttle Body Gasket
16176-P2A-004 Nippon Leakless The normal gasket for 90bhp engines
Image
Image

Oil Drain Plug Washer for Auto Gearbox
90471-PX4-000 (18mm)
Image

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: The OEM Service Stuff for EJ9 (with Part Numbers)

Post by BETEK »

Headgasket
12251-P2J-004 Nippon Leakless
Image


Oil Pump Seal
91212-P01-003 NOK 31x46x7 `96-`98 models
Image

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: The OEM Service Stuff for EJ9 (with Part Numbers)

Post by BETEK »

Cabin filter*
80291-ST3-505 With A/C
Image


*Some civics don't have any cabin filter. So check if your's has at the front of glove box

Image
Image

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: The OEM Service Stuff for EJ9 (with Part Numbers)

Post by saxophonias »

great contribution!! ;) ;)
as for the last, mine doesn't have a cabin filter ;)

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: The OEM Service Stuff for EJ9 (with Part Numbers)

Post by mynameisowen »

Mine does! =P
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: The OEM Service Stuff for EJ9 (with Part Numbers)

Post by saxophonias »

It's in Greek but John will do the work :D
Image
The part that fades under the window

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: The OEM Service Stuff for EJ9 (with Part Numbers)

Post by BETEK »

Honda superceeded the crank pulley bolt 90017-P01-003 to new one, so the new part number is 04133-P01-305.
Maybe the reason was that the old design was hard to pull it out or maybe the broken bolts. How knows?

a photo with old design bolt that is broken
Image

The new design bolt
Image

Also the instructions changed about the tightening process.
Here we go
Image

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: OEM Service Parts EJ9

Post by Dodo Bizar »

Wow I did not know that procedure. I always put them on the 196 Nm or so point and leave ehm. Survived 4 belt changes so far.

Post Reply