Accident!

Any issues? Discuss them here
User avatar
Dwardu
Posts: 110
Joined: Tue Aug 10, 2010 3:35 pm
Location: Malta

Accident!

Post by Dwardu »

Went round a bend a bit too fast in the wet, and i span 180 into a central strip :<

body is fine, but i banged both rear wheels, rear left one has a slightly dented rim but thats not so bad, the rear right one though ive developed some camber... Also i think my wheel bearings are gone since there is a whirring noise at 60km/h and above. Any thoughts on what the camber could be caused by? My mechanic is taking a proper look tomorrow but his initial thought was a bent hub. I looked around inside myself a bit and compared both sides, nothing looked bent to me in the ways of control arms

Image
--

Firebass
Posts: 351
Joined: Wed May 26, 2010 8:35 pm
Contact:

Re: Accident!

Post by Firebass »

sorry :/
Up the Rev Limiter !!!!!!

hondamake
Posts: 127
Joined: Thu Nov 17, 2011 9:52 pm
Location: Liverpool

Re: Accident!

Post by hondamake »

Hard luck bro, I trust there were no injuries. We'll keep our fingers crossed that it's a replaceable part.
Fast, reliable, cheap. Pick any two - because you won't get all three!

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: Accident!

Post by BETEK »

It's hard to say if there is problem with only one picture. If you have any others photos post them in order to make better opinion.
The best way to see if there is a problem is to put the car on suspension alignment machine

User avatar
Dwardu
Posts: 110
Joined: Tue Aug 10, 2010 3:35 pm
Location: Malta

Re: Accident!

Post by Dwardu »

I didnt take more cause i was sending it off to the mechanic anyway and didnt feel like removing the wheel :P got it back now and he says its just the bushing, thats a nice relief :D
--

Acc3l3ratoR
Posts: 126
Joined: Sun Jan 30, 2011 3:42 pm

Re: Accident!

Post by Acc3l3ratoR »

would that be the trailing arm bushing....??

User avatar
Dwardu
Posts: 110
Joined: Tue Aug 10, 2010 3:35 pm
Location: Malta

Re: Accident!

Post by Dwardu »

yes, this one (Pic is of some other civic not mine)

Image
--

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: Accident!

Post by saxophonias »

so maybe replace both busings in left and right side. If you need a bearing just use a japanese brand so as to get it cheaper. Done it to mine and holds like stock after 10 years.

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Accident!

Post by mynameisowen »

Hope you get it fixed soon! :)
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

Acc3l3ratoR
Posts: 126
Joined: Sun Jan 30, 2011 3:42 pm

Re: Accident!

Post by Acc3l3ratoR »

I have to change those bushings too... cuz they are realy scuiky... :roll:

Post Reply