hood locker

Any issues? Discuss them here
Post Reply
Firebass
Posts: 351
Joined: Wed May 26, 2010 8:35 pm
Contact:

hood locker

Post by Firebass »

yo guys i dont know if i say the correct word , i used to let my hood fall down and it was totally closing now it doesnt close i have to press it with my hands i checked and the device doesnt open well 1 small iron piece , but if i press it with my hands it opens can it be fixed or should i take new one ?
Up the Rev Limiter !!!!!!

User avatar
sktaroins
Posts: 368
Joined: Sat Feb 11, 2012 8:49 pm
Location: Dubai
Contact:

Re: hood locker

Post by sktaroins »

Ow mate .. I think u broke the lock from racing the hood to fall down and lock..
Thats not the way. While closing u have to gentely put it down and then pushing it down to click.
You cant throw the hood to lick by itself, :)

Try to use w40 if its not broken and then use grease ,
Hope it works out... Maybe it didnt break, maybe the lock is bent..

Anyway gd luck.

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: hood locker

Post by mynameisowen »

I also close it then push down to click ;p
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

Firebass
Posts: 351
Joined: Wed May 26, 2010 8:35 pm
Contact:

Re: hood locker

Post by Firebass »

when u close the hood the hook must go inside a small hole that is on the hood , my hook was going forward, so i took a pipe locker and i made an angle on the hook and now its ok :P
Up the Rev Limiter !!!!!!

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: hood locker

Post by saxophonias »

Haven't faced such a problem so far 8-)

Post Reply