Page 1 of 1

PCV Valve

Posted: Sun Nov 04, 2012 8:18 pm
by BETEK
PCV Valve=Positive Crankcase Ventilation Valve
Helps to keep away the moisture out of the engine oil and relieving pressure from the engine to prevent oil leaks and oil consumption.
Engine vacuum in intake manifold sucks fumes from the crankcase and burns them harmlessly in the engine
If the PCV Valve fails, severe sludge can build up and oil leaks can occur.


Image

Image

Re: PCV Valve

Posted: Sun Nov 04, 2012 8:35 pm
by BETEK
PCV Valve is the number 3 on the picture

Image

Part numbers for EJ9's PCV Valves are: 17130-PR4-Y01 and 17130-PK1-003
and for the grommet (number 2 on the picture) is 11855-P72-000

PCV Valve
Image

Re: PCV Valve

Posted: Mon Nov 05, 2012 9:04 am
by saxophonias
do we still have it with the intake manifold swap?

Re: PCV Valve

Posted: Mon Nov 05, 2012 11:34 am
by BETEK
Yes it is still there!
When swapping Intake Manifold it is chance to change PCV Valve with new one because we have easy access to it.

Re: PCV Valve

Posted: Mon Nov 05, 2012 12:03 pm
by saxophonias
and what would be the gains? Do you know the cost?

Re: PCV Valve

Posted: Mon Nov 05, 2012 1:32 pm
by mynameisowen
Good post, what is part 1??

Also where do you find all this info? Did you find electronic copy of service manual?

Re: PCV Valve

Posted: Mon Nov 05, 2012 1:43 pm
by BETEK
saxophonias wrote:and what would be the gains? Do you know the cost?
Is maintenance issue if it works it is good! For example oil filter doesn't give any gain but if not changed then might appear problem to the engine.
If PCV Valve not work, then slowly appearing some problems for example moisture in the oil.
BETEK wrote:PCV Valve=Positive Crankcase Ventilation Valve
Helps to keep away the moisture out of the engine oil and relieving pressure from the engine to prevent oil leaks and oil consumption.
Engine vacuum in intake manifold sucks fumes from the crankcase and burns them harmlessly in the engine
If the PCV Valve fails, severe sludge can build up and oil leaks can occur.
The cost according to the http://www.lingshondaparts.com is 45 Euro.


mynameisowen wrote:Good post, what is part 1??
The part 1 is the breather tank of the engine oil's fumes
Image
mynameisowen wrote: Also where do you find all this info? Did you find electronic copy of service manual?
viewtopic.php?f=41&t=213

Re: PCV Valve

Posted: Tue Apr 02, 2013 10:50 pm
by BETEK

Re: PCV Valve

Posted: Sat Apr 20, 2013 10:08 am
by Firebass
i have broken the inside small part to have free flow on my b :) the crankcase keeps breathing all time to avoid inner pressure :)