Re: Oil Leak from intake tube
Posted: Sat Apr 13, 2013 9:36 pm
I've checked it again and it is BKR6E - 11 indeed. The only difference is that they are made in France. Right now on third cylinder I've put a used NGK, made in Japan. However I am considering a new set for install asap.
About the oil leakage in the intake maybe its from the mistake i made by putting too much oil. The engine simply regulates its level by throwing it out by the least resistance points(oil vapor etc). From what i saw i can not say that there was a problem inside the engine that caused it to throw oil. I will continue to investigate the problem because i am considering more tunning to the powertrain. And don't want to do it on an engine that has a problem (hope not).
Thanks for the replies, i will continue to inform you on the project and hopefully help others with similar issues!
Cheers!
Edit:
In respect to the above wich model of NGK spark plugs would you sugest i should buy? The same as before, iridiums or other type?
About the oil leakage in the intake maybe its from the mistake i made by putting too much oil. The engine simply regulates its level by throwing it out by the least resistance points(oil vapor etc). From what i saw i can not say that there was a problem inside the engine that caused it to throw oil. I will continue to investigate the problem because i am considering more tunning to the powertrain. And don't want to do it on an engine that has a problem (hope not).
Thanks for the replies, i will continue to inform you on the project and hopefully help others with similar issues!
Cheers!
Edit:
In respect to the above wich model of NGK spark plugs would you sugest i should buy? The same as before, iridiums or other type?