Oil pressure gauge installation!
Oil pressure gauge installation!
Hello! I bought some gauges! On of them is oil pressure! Ok, then I have a question, where I need to connect/install the pressure sender? probably you have some photoes? I need some advises! Thank you so much!
EJ9 1.4 with D16Z6 IM (crashed-sold)
Volvo V40 1.9TD (now)
Volvo V40 1.9TD (now)
Re: Oil pressure gauge installation!
You got a oil filter adapter? You put it between your engine and your filter. Here`s a example
![Image](http://www.fullcartuning.nl/images/fotos/2548-Oil-Filter-Adapter-For-Pressure-And-Temperature-Gauges-1.JPG)
- Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: Oil pressure gauge installation!
I know some other brands car manufacturers (VW for instance) have pre drilled and tapped holes for this. Are such holes available on Honda engines? I think there is one located under the valve cover at the camshaft brdige, or is that not the intended use since it need the valve cover to be removed
?
![Confused :?](./images/smilies/icon_e_confused.gif)
Re: Oil pressure gauge installation!
Use a T at your engine's oil pressure sender and plug the new one with the stock. or you can use the sandwich plate. they are all around ebay etc for use with turbo oil lines
Re: Oil pressure gauge installation!
I used "T" adapter, and plugged new with stock oil pressure sender...lumpenst wrote:Use a T at your engine's oil pressure sender and plug the new one with the stock. or you can use the sandwich plate. they are all around ebay etc for use with turbo oil lines
And all works great!
![Wink ;)](./images/smilies/icon_e_wink.gif)
EJ9 1.4 with D16Z6 IM (crashed-sold)
Volvo V40 1.9TD (now)
Volvo V40 1.9TD (now)