Page 1 of 1

OEM Oil and Fluid Specifications

Posted: Tue Jul 14, 2009 12:46 am
by saxophonias
Image
Image
Image
Image
Image
Image
Image
Image

Re: OEM Oil and Fluid Specifications

Posted: Tue Oct 27, 2009 8:27 pm
by saxophonias
http://www.liqui-moly.com/liquimoly/web ... guide.html
Here is a nice link that includes the capacities of oil and fluids for every car. Check this out if you are uncertain on how much fluid you need to drop :D

Re: OEM Oil and Fluid Specifications

Posted: Tue Oct 27, 2009 9:34 pm
by Law_
Thank you ! To save the search 3.6L is the oil capacity with filter for our D14s.
Some say that we should add some oil ABOVE the max mark to prevent the oil pump to "dry" in tight corners - common reason for B series engines to be irreversibly damaged. (Someone know if our crankcase has already a metal sheet in the deepest part to prevent all oil to leave the oil pump in corners?)
Some also say that level should be BELOW the max mark, due to extreme oil pressure at high RPMs.
This discussion means a lot to me... It worries and divides me.
Cheers

Re: OEM Oil and Fluid Specifications

Posted: Tue Oct 27, 2009 10:01 pm
by BETEK
The oil capacity of d14s is 3.3liters with oil filter otherwise 3liters without oil filter.
And for total rebuild of engine requires 4 liters of oil.