IM connections?

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: IM connections?

Post by mynameisowen »

I think Ilya posted a schematic somewhere, maybe PM him or Betek, I dont remember where they are...
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

User avatar
ilya
Posts: 565
Joined: Wed Aug 05, 2009 1:27 pm
Location: Russia
Contact:

Re: IM connections?

Post by ilya »

look at the signature)
viewtopic.php?f=7&t=359 how2swap IM
EJ9 Russian Helper http://www.ej9.ru
Full Scheme SFI-OBD1 PDF [ENG]
SofRom 1.15 R2 - Chippest RTP Emulator like Hondata S300 and Moates Ostrich

pardizzle21
Posts: 129
Joined: Mon Aug 22, 2011 8:37 pm
Location: Nr Telford,shropshire, west mids, UK

Re: IM connections?

Post by pardizzle21 »

twister wrote:alright, will try the way of relooping en blockingoff first.

Hi there, i was confused by my coolant lines after the swap and blocked the vertical pipe off, and connected the horizontal pipe to the 1 just above the pvc, then shorted the racv tubes, car seems fine. but i was wondering if i should of blocked off the horizontal 1 instead of the vertical 1? i just wana reassure myself my car wont blow up lol thanks ,tom

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: IM connections?

Post by Dodo Bizar »

Well, with the small lines you can't do really that much harm... you could block them all just of. Thing is, short-circuiting things looks better and is safer since a good blocker is hard to make (can leak if done poorly).

But the main coolant flows, those you ain't touching at all, so don't worry about that.

Unless you are a complete idiot and destroy the thermosstat housing by accident... like I did... yesterday... but fixed since I do happen to have a lot of spare parts... yeah kinda frustrated here. Only then you put your car in danger :mrgreen: .

pardizzle21
Posts: 129
Joined: Mon Aug 22, 2011 8:37 pm
Location: Nr Telford,shropshire, west mids, UK

Re: IM connections?

Post by pardizzle21 »

cheers for that pal, reassuring! ps this forum is great!tom :D

ilovemyej9
Posts: 26
Joined: Thu Dec 29, 2011 5:56 pm

Re: IM connections?

Post by ilovemyej9 »

small question:

D16Z6 swap for im

we replace the evap d16z6

Image

by evap d14Z2??

Image

thank you

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: IM connections?

Post by Dodo Bizar »

You do not need to swap to D14 EVAP. Just keep D16 version, it works fine (and is a little smaller = better looks).

ilovemyej9
Posts: 26
Joined: Thu Dec 29, 2011 5:56 pm

Re: IM connections?

Post by ilovemyej9 »

the plug does not go on the EVAP d16

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: IM connections?

Post by Dodo Bizar »

Ah true... well I changed the plug :). But it does not matter, you can put the D14 if you like and keep the plug. I did not realize that actually.

ilovemyej9
Posts: 26
Joined: Thu Dec 29, 2011 5:56 pm

Re: IM connections?

Post by ilovemyej9 »

ok, thank you very much for your advice :)

Post Reply