D14A3/A4 versus D14A8

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: D14A3/A4 versus D14A8

Post by mynameisowen »

Why did you choose the D14 head over the D16 one? I think it has been said before that they are very similar (like you just mentioned). Unless the D16 head is damaged.
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

hondamake
Posts: 127
Joined: Thu Nov 17, 2011 9:52 pm
Location: Liverpool

Re: D14A3/A4 versus D14A8

Post by hondamake »

My goal is to build a simple free revving motor that has enough go to be fun, I don't need/want ultimate performance. I'm fortunate enough to own a number of cars one of which will eat any Civic I know of for breakfast. The plan is to use a D13/14 block for it's bore/stroke ratio. A D16 head for it's (slightly) better valve size. A better inlet manifold and/or forced induction. Two rules:- any mod must be cheap or free, any mod that isn't cheap or free must be an original concept that I personally bring to realisation. At the moment I have a civic D16Y7 with a burnt valve and iffy valve guides and a cheap complete D14A4. The short term fix was to use the D14 head on the D16 already in place BUT the longer term plan is to use the remaining components to create the motor I want. ;)
Fast, reliable, cheap. Pick any two - because you won't get all three!

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: D14A3/A4 versus D14A8

Post by mynameisowen »

Sounds like a great plan; one that I envy :) Make sure we're kept up to date! :mrgreen:
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: D14A3/A4 versus D14A8

Post by BETEK »

hondamake wrote:I'm fortunate enough to own a number of cars one of which will eat any Civic I know of for breakfast. The plan is to use a D13/14 block for it's bore/stroke ratio. A D16 head for it's (slightly) better valve size. A better inlet manifold and/or forced induction. Two rules:- any mod must be cheap or free, any mod that isn't cheap or free must be an original concept that I personally bring to realisation.
Not be so sure, Turbo Civics are very tough opponents for example if they are with 320-350hp :mrgreen: :mrgreen:
The valves size is same on D14a3/4 and D16y7/8 etc.
Even the exhaust valves are the same with current Accord ones.
Also the Sohc Vtec D16 on EG Civics 1995 have the same valves with D14a3/4

hondamake
Posts: 127
Joined: Thu Nov 17, 2011 9:52 pm
Location: Liverpool

Re: D14A3/A4 versus D14A8

Post by hondamake »

Hi Betek. I know that civics with 300+ BHP do exist but they are like golden eagles; very rare, hard to find and I aint never seen one in the wild! :lol: Thanks for the info on valve sizes, it contradicts my research but I will take my hat off to your greater knowledge. :mrgreen:
Fast, reliable, cheap. Pick any two - because you won't get all three!

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: D14A3/A4 versus D14A8

Post by BETEK »

Intake Valves Part Number --> 14711-P2A-000
Exhaust Valves Part Number -->14721-P2A-000

Image

hondamake
Posts: 127
Joined: Thu Nov 17, 2011 9:52 pm
Location: Liverpool

Re: D14A3/A4 versus D14A8

Post by hondamake »

Could you post that one to me? :lol: I'll post a photo of what mine look like at the weekend. :o
Fast, reliable, cheap. Pick any two - because you won't get all three!

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: D14A3/A4 versus D14A8

Post by Dodo Bizar »

Yes 300 bhp Civics are rare, I know a couple of them... there once was the Jamex Civic, a prepped demo car with D16Y7 engine, turbo... several secret ingredients and 307 bhp if I remember correctly. Car is now 'hidden' somewhere in NL I hope, but I know the performance has aged... want to get my hands on it one day and open up the engine. It was built in 1999 if I remember correctly.

For the rest on the strip you have a lot of Civics with such horse power, especially B16 engines with basic turbo get there easily and pretty reliable. I also know a 850 bhp Civic... reliability? A well, not for it's tranny at least.

But any brand can be turned to a hot rod given enough time and money. Most reliable Civics I know of top out just over 200 bhp.

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: D14A3/A4 versus D14A8

Post by saxophonias »

Sebastix for example! 200hp with stock internals but great tuning as far as i can tell.

hondamake
Posts: 127
Joined: Thu Nov 17, 2011 9:52 pm
Location: Liverpool

Re: D14A3/A4 versus D14A8

Post by hondamake »

If I can get past 130bhp without spending big cash then I will have succeeded in my original goal. :) For me this is not about ultimate performance but it is about developing my knowledge and skills, I love my Honda and can't think of a better car to try and develop.
Fast, reliable, cheap. Pick any two - because you won't get all three!

Post Reply