Page 1 of 1
What's up in the work in progress
Posted: Mon Jan 25, 2010 9:24 pm
by Dodo Bizar
Well most of our members all know that in the left menu bar of DU, a few articles are mentioned with the status CS... Coming Soon. Now soon is relative and for some articles over 2 years.
To build this site further, I first started this entire forum, but I also want to use this area to construct and discuss articles. Puts some heat under my feet and perhaps improves quality.
Let's see if it works... I'll start up the CSs and I invite everyone to start an article. I cannot garantee I will use it, but lets see what works and what not.
As a rule: the first post of each article should be as close as possible to the finalised product. Any reworked comments should be changed in the first post... finished comments (posts with reaction) are pruned (deleted) when resolved.
I'll try to start up some...
Re: What's up in the work in progress
Posted: Tue Jan 26, 2010 9:16 am
by mynameisowen
Great idea
Re: What's up in the work in progress
Posted: Wed Feb 03, 2010 4:19 pm
by ilya
Good idea! this site should be developed! I certainly do not tell you about the CS, but suggest that the people have laid out their personal projects (other than the description) such as picture report - finished, ie is what is spoken after the branch, this branch is trimmed and ready to get a piece to solving the problem. just invite myself, (maybe someone you would support me) not much change the site. I mean look.
and a little more chatter.
could do something like FAQ? Since the opening of your forum seems to me a little added people who simply read. who then added, and communicates. but sometimes one and asks tezhe questions or can not find the answer to replace something or the engine.
Re: What's up in the work in progress
Posted: Fri Jan 04, 2013 6:52 pm
by hondaNickx
Btw i noticed wikipedia added D14 information about the rods and such.
Did somebody send them this information or did they just took it over from here ?
Re: What's up in the work in progress
Posted: Sat Jan 05, 2013 10:23 pm
by Dodo Bizar
No idea, I am wondering to.
Re: What's up in the work in progress
Posted: Fri Jun 21, 2019 8:07 pm
by Dodo Bizar
Yeah... 6 years later... not much happening anymore on my front as you all can see. Anybody around?
Re: What's up in the work in progress
Posted: Tue Jul 02, 2019 2:51 pm
by saxophonias
I have many things sitting around but don't have the time to install them.
So I bought 2 d16z6 engines (one running well and the other for parts) from which I only swapped the gearbox. Finally, I convinced my self not to swap and to continue with the d14. So I have in the garage lying around the obd1 ecu conversion a bisimoto 2nd stage cam i got from Nick, some retainers and some valve springs. I also want to shorten the d16z6 gearbox with gears i have from the other boxes.. Let's see.The engine currently has almost 333K with good compression and minor oil consumption. However I don't feel it so strong anymore and its mileage has declined (7.5-8.5lt/100km)
Re: What's up in the work in progress
Posted: Sat Jul 06, 2019 1:29 am
by sandras
I have found this site maybe a year ago. I have an EJ9 and use this site for info. Quite useful I'd say. Thank you for your work. : )
Re: What's up in the work in progress
Posted: Wed Dec 25, 2019 10:32 am
by Dodo Bizar
You're welcome!