engine swap d14z2 to zc vtec

General discussions on EJ9 and D14 improvements. How far can you reach?
Post Reply
Ek99
Posts: 18
Joined: Thu Dec 17, 2009 11:21 pm

engine swap d14z2 to zc vtec

Post by Ek99 »

hi guys!
what do i need to swap the engine to zc vtec?
i mean the parts?
and
what to change?
tnx!

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: engine swap d14z2 to zc vtec

Post by Dodo Bizar »

Which engine is the ZC? I am confused...

hondaNickx
Posts: 713
Joined: Wed Aug 05, 2009 1:06 am
Location: Belgium

Re: engine swap d14z2 to zc vtec

Post by hondaNickx »

Dodo Bizar wrote:Which engine is the ZC? I am confused...

ZC is the japanese D16a9 dohc d-series.
The ZC vtec would be something else i guess...
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"

Ek99
Posts: 18
Joined: Thu Dec 17, 2009 11:21 pm

Re: engine swap d14z2 to zc vtec

Post by Ek99 »

zc is 1.6 vtec 130 hp.
obd1. very powerful engine!
is like d16z6 or d16z9 or d16a

User avatar
saxophonias
Posts: 2590
Joined: Fri Jul 03, 2009 6:03 am

Re: engine swap d14z2 to zc vtec

Post by saxophonias »

there is a confusion with the ZC engines. Actually with this code there are the dohc non vtec 1.6 and some 1.5 sohc vtec engines. So you are talking about some d15b vtec engine jdm version with 130 some of which where lsd factory equipped. Are you looking for a engine swap or some mini-me conversion?

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: engine swap d14z2 to zc vtec

Post by Dodo Bizar »

Should not be too difficult, engine should fit normally in the mounts. Getting it working should not be too hard. OBD1 conversion?

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: engine swap d14z2 to zc vtec

Post by mynameisowen »

Im sure it would work but you would get a similar power output from a mildly tuned Z6 or Y8 which would be an easier swap :D
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

Post Reply