Sebastix D14Z1 dyno history

D14 Dynoplots
Sebastix
Posts: 138
Joined: Sat Aug 15, 2009 2:04 pm

Re: Sebastix D14Z1 dyno history

Post by Sebastix »

New dyno!

Image
Click for large size

3.8 psi, ~20 degrees ignition, tuned till 6000rpm

This was the first run after some tuning on the dyno. Unfortuanately my airbox was leaking after this run...so the last run was only 150hp @ 1.8psi.

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: Sebastix D14Z1 dyno history

Post by Dodo Bizar »

Very progressive curve Sebas.... turbo is just starting from the looks of it. I think you lost power under 3000 rpm compared to NA and won power above 3500?

Setup not focussing on lower rpm torque?

User avatar
saxophonias
Posts: 2592
Joined: Fri Jul 03, 2009 6:03 am

Re: Sebastix D14Z1 dyno history

Post by saxophonias »

Still i am amazed how much power it delivers with so little boost!

Sebastix
Posts: 138
Joined: Sat Aug 15, 2009 2:04 pm

Re: Sebastix D14Z1 dyno history

Post by Sebastix »

Dodo Bizar wrote:Very progressive curve Sebas.... turbo is just starting from the looks of it. I think you lost power under 3000 rpm compared to NA and won power above 3500?

Setup not focussing on lower rpm torque?
Well it's not very good tuned yet in the lower rpm's because the map sensor was not accurate because we had that boostleak. That will be fixed soon I hope :)

Civic VTI-Turbo
Posts: 7
Joined: Tue Sep 01, 2009 7:14 pm

Re: Sebastix D14Z1 dyno history

Post by Civic VTI-Turbo »

saxophonias wrote:Still i am amazed how much power it delivers with so little boost!
Me 2! We were on 150bhp and than i added a few degrees timing. And 180bhp came out :shock:

Really amazing....
van Drie Tuning
eCtune authorized tuner
the Netherlands

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: Sebastix D14Z1 dyno history

Post by Dodo Bizar »

Wow...

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Sebastix D14Z1 dyno history

Post by mynameisowen »

very impressive, how much boost can these engines safely take?
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

hondaNickx
Posts: 713
Joined: Wed Aug 05, 2009 1:06 am
Location: Belgium

Re: Sebastix D14Z1 dyno history

Post by hondaNickx »

mynameisowen wrote:very impressive, how much boost can these engines safely take?
It think Sebastix is allready on the limit or over it :lol: ;)
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"

Sebastix
Posts: 138
Joined: Sat Aug 15, 2009 2:04 pm

Re: Sebastix D14Z1 dyno history

Post by Sebastix »

Running on 4.7psi now!

You should not forget this setup is about 30% more efficient because the ITB's. The stress on the internals is not that big as you think with making almost 200Chp now I think with 4.7psi :) A normal D14 turbo build needs 7-8psi to make around 180-190Chp :) I only need 4-5psi.

I hope my tuner is right...and me too also haha

Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Re: Sebastix D14Z1 dyno history

Post by Law_ »

i've been reading about this and i guess 5-6 psi (0,4 bar) is supposed to be supported by engine internals. More is sayd to be hard for stock engines. Excelent power output... it would be difficult if not impossible to reach these values on NA D14 engine dont you all agree? Cheers

Post Reply