![Image](http://img686.imageshack.us/img686/44/image0204a.th.jpg)
camgear
-
- Posts: 129
- Joined: Mon Aug 22, 2011 8:37 pm
- Location: Nr Telford,shropshire, west mids, UK
Re: camgear
baz wrote:Nope it doesn't matter, D14/15/16 camgears are all the same.
hi, so im not wasting my time ordering an aem d16z6 cam gear for my d14z2 ??
its bloody xpensive so id like to be sure, thanks alot, pardizzle21
- Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: camgear
I'd say very good investment, and yes it fits. The OEM cam gears D16/D14 are actually identical.
-
- Posts: 129
- Joined: Mon Aug 22, 2011 8:37 pm
- Location: Nr Telford,shropshire, west mids, UK
Re: camgear
thats what i wanted to hear!! am i right in saying il want them (the dyno people) to retard the cam and advance ignition?its off for a remap soon since the |IM swap has made the car run abit lean i think....
many thanks! pardizzle21
many thanks! pardizzle21
- Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: camgear
I think you say it correctly. But take small steps at a time.
As about the lean running, normally IM swaps tent to run rich! Contradictory to what one would think. I guess the FPR on the D16 fuel rails has a slightly higher pressure, but it's guessing.
As about the lean running, normally IM swaps tent to run rich! Contradictory to what one would think. I guess the FPR on the D16 fuel rails has a slightly higher pressure, but it's guessing.
-
- Posts: 129
- Joined: Mon Aug 22, 2011 8:37 pm
- Location: Nr Telford,shropshire, west mids, UK
Re: camgear
ahhhhh useful information, do you know much about adjustable pressure regulatrs?is there any pages on them?
I have one and u say it runs rich becaus of the d16 regulator?
thanks, pardizzle
I have one and u say it runs rich becaus of the d16 regulator?
thanks, pardizzle
- Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: camgear
Adjustable does not make me happy at all, one I had was very much influenced by weather changes. On cold days it would run lean. My guess the spring stiffness went down due to poor temperature response. Yes D16 might run rich, but to me not unacceptable rich. Its just that, a bit rich.
-
- Posts: 129
- Joined: Mon Aug 22, 2011 8:37 pm
- Location: Nr Telford,shropshire, west mids, UK
Re: camgear
cheers dodo, maybe il put the standard d16 reg on then and see hw it runs, thanks!
-
- Posts: 129
- Joined: Mon Aug 22, 2011 8:37 pm
- Location: Nr Telford,shropshire, west mids, UK
Re: camgear
yep Dodo you were correct again, swapped it last week and the engine light doesnt come on anymore!
runs better too!cheerssss
runs better too!cheerssss