New Springs with OEM damper?

From soft stock to hardcore track, what do you use?
hondaNickx
Posts: 713
Joined: Wed Aug 05, 2009 1:06 am
Location: Belgium

Re: New Springs with OEM damper?

Post by hondaNickx »

Law_ wrote:Maybe they are tuff to find?
Or is it simple?
Regrats

There are jdm part suppliers around here that can get them for sure.
And i think you can find them on ebay too.
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"

Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Re: New Springs with OEM damper?

Post by Law_ »

I may get my hands in some Weitec springs (6cm). Anyone know something about them? Cheers

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: New Springs with OEM damper?

Post by BETEK »

Lowering 6cm it is to much for civics.
The reason is that the car suspension does not work correctly and trans-axles will been damaged in a very soon period, also the parts of suspension and steering column.
I suggest 4cm maximum lowering for civics 92-00.

Law_
Posts: 1154
Joined: Wed Aug 05, 2009 3:37 pm
Location: Portugal

Re: New Springs with OEM damper?

Post by Law_ »

And can this be prevented by using aftermarket shocks? cheers

daniLM
Posts: 3
Joined: Tue Apr 12, 2011 10:10 pm

Re: New Springs with OEM damper?

Post by daniLM »

for those who have lowered your cars around 3mm: do you drive on all tarmac roads in everyday life or do you go through dirt roads and roads with pot holes? your cars look nice on the pictures, but do they behave well on rough surface?

Cheers

User avatar
BETEK
Posts: 1213
Joined: Wed Oct 21, 2009 10:09 am

Re: New Springs with OEM damper?

Post by BETEK »

Unfortunately at rough surface roads I wish I had the OEM suspension.
But if the road is good the cornering ability is better with lowered suspension

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: New Springs with OEM damper?

Post by Dodo Bizar »

When lowered 4cm, dirt roads were not a real problem to my EJ9... but currently I think my cars are lowered around 6-10 cm (using aftermarket springs + dampers) and I'd really don't go on bad roads anymore.

Actually, yesterday I even used google streetview to plan my trip. Turned out I could safely take the coupe which has a lowest point of 3.5 cm. Being low has its price... on the other hand, my excuse is I DO use my cars for the track hehehe.

User avatar
saxophonias
Posts: 2592
Joined: Fri Jul 03, 2009 6:03 am

Re: New Springs with OEM damper?

Post by saxophonias »

do you have many crappy roads on Holland?:roll:

User avatar
Dodo Bizar
Site Admin
Posts: 2009
Joined: Mon Jun 22, 2009 10:36 pm

Re: New Springs with OEM damper?

Post by Dodo Bizar »

Well, for the biggest part our roads are amongst the best... except they put speedbumps everywhere! Its the speedbumps that I used streetview for :).

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: New Springs with OEM damper?

Post by mynameisowen »

My friend who is into the dub scene (if you aint rubbin' you ain't dubbin =P) always drives over bumps sidewards, or as sidewards as possible, do you find this helps?? I've never had to worry about it.
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

Post Reply