steering pump from ek9
- saxophonias
- Posts: 2590
- Joined: Fri Jul 03, 2009 6:03 am
steering pump from ek9
Do you know whether the steering pump from an ek9 would fit our ej9? Does it matter if it is from a right hand drive or not? I have heard that it gives less power assistance so makes the steering heavier. Could it be this?
Re: steering pump from ek9
if it makes the sterring heavier why u want it ?
Up the Rev Limiter !!!!!!
- saxophonias
- Posts: 2590
- Joined: Fri Jul 03, 2009 6:03 am
Re: steering pump from ek9
because i like heavy feeling when cornering. ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
Re: steering pump from ek9
I'm not very sure B-series pumps will fit D-series...
-
- Posts: 713
- Joined: Wed Aug 05, 2009 1:06 am
- Location: Belgium
Re: steering pump from ek9
I think you mean the steering rack rather then the oil steering pump.
Type-r rack has less turns lock to lock afaik.
Pump from right hand drive would have to have different brackets but besides that i don't think there's much difference.
Type-r rack has less turns lock to lock afaik.
Pump from right hand drive would have to have different brackets but besides that i don't think there's much difference.
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"
- saxophonias
- Posts: 2590
- Joined: Fri Jul 03, 2009 6:03 am
Re: steering pump from ek9
the pump i was referring to Nick ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
Re: steering pump from ek9
There is a way to have a little bit heavier steering wheel with adjustment of steering rack gearbox.saxophonias wrote:because i like heavy feeling when cornering.
The adjustment can be made of the nut that is on gearbox, it is for steering wheel play but if we tighten little the small nut then feeling changing to heavier.
![Image](http://photos.motoiq.com/MotoIQ/Project-Cars/Miatabusa/Bust-a-nut/871972858_Dgegh-M.jpg)
We need two wrenches 40mm and 14 or 15mm.
First must be loosen the big nut and then adjustment made from the little nut.
- Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: steering pump from ek9
I am not sure, but there might be a flow problem. I actually had the B16B pump for a long time on my EJ1 steering rack. It never felt good, it was always buzzing a little, and after a while the pump broke down.
Now I have a B16A2 pump on the EJ1 and the steering now is lighter and the buzzing/humming is hardly noticeable. This can be due to the fact that I had a pump not matching the rack, or I had non-Honda steering pump oil in it, and the thing just broke down cause of that. The pump oil I don't know which brand it was, not being a Honda oil is just a wild guess... but now it has Honda in it.
At HF we argued it might be that the flow was wrong for the rack perhaps... but well, not sure if that is a real possibility, but wanted to warn you of this. Maybe someone can confirm or counter my story?
Now I have a B16A2 pump on the EJ1 and the steering now is lighter and the buzzing/humming is hardly noticeable. This can be due to the fact that I had a pump not matching the rack, or I had non-Honda steering pump oil in it, and the thing just broke down cause of that. The pump oil I don't know which brand it was, not being a Honda oil is just a wild guess... but now it has Honda in it.
At HF we argued it might be that the flow was wrong for the rack perhaps... but well, not sure if that is a real possibility, but wanted to warn you of this. Maybe someone can confirm or counter my story?